Massive Recruitment at Sevan Construction Nigeria Limited


Sevan Construction Nigeria Limited was established in 1981 with Registration No. RC 37125 as a Limited Liability company specialized in all kinds of Steel Fabrication design, development and manufacturing of various semi-trailers, rigid bodies and complementing its steel structure business with civil construction, which enabLed the company to deliver complete projects of steel structures coupled with civil engineering.

We are recruiting to fill the position below:

1.) Crane Operator/Rigger

2.) Welder Mate

3.) Forklift Operator

Required Skills & Qualifications

  • 3 – 7 years experience as Fitters, Crane and Forklift operator.
  • Completion of High School or OND or Trade Test I, II, III is preferred
  • Must be forklift Certified

Job Title: Trainee – Safety Officer
Location:
 Lagos

Job Descriptions

  • Work with the safety team towards ensuring a better understanding of the inherent risks associated with projects and controls put in place to reduce risks.
  • Carry out periodic audits to ensure compliance with approved standards, work procedures and guidelines
  • Dissemination of HSE issues to the entire work force
  • Hold HSE Meeting, tool box talks, pep talks on a regular basis.
  • Plan and carry out Emergency drills to sharpen employee awareness on ERP procedures in case we are faced with a live situation.
  • In compliance with applicable environmental legislation, ensure that wastes are properly managed to approve standards.
  • Participate actively in in-house HSE training for employees to improve their on the job awareness and competency.
  • Carry out pre mob inspection of all equipment before mobilising to site to ensure that they are in good condition and can deliver the job.

Required Skills and Qualification

  • Minimum of National Diploma (ND) in Engineering or Sciences with at least 2 years cogent experience.
  • NISP Level iii Certification.
  • Must be computer literate – Word, Excel, Power Point , etc
  • Experience in HSE supervision in construction sites.

Job Title: Assistant Production Manager
Location:
 Lagos

Job Descriptions

  • Overseeing the production process
  • Work closely with the Production Manager on a daily basis to assist with procurement and logistics
  • Take daily report on each job you are assigned to do, and progress report on the workers result.
  • Partner with project engineer and project team to ensure effective management of shop drawings.
  • Ensuring that projects are completed in a cost effective and timely manner within quality guidelines
  • Foreseeing and resolve potential problems before they happen
  • Liaising with different departments to achieve operational objectives.
  • Working with department heads to uphold and implement SCNL policies and goals
  • Supervising and motivating a team of workers.
  • Identifying training needs, and ensuring proper training is provided
  • Produce accurate material take-off lists from shop drawings.
  • Compile loading lists, plate take-offs and fitting sheets.
  • Manage and coordinate shop drawings, ensuring they are current, have the correct paperwork attached, and are issued to the Workshop in timely manner.
  • Check incoming purchase orders and actual materials/ goods received are correct
  • Assist with production scheduling.
  • Preparation of drawings to assist fabrication.
  • Working on CNC plasma machine.

Required Skills and Qualifications

  • Ability to prioritize multiple projects.
  • Leadership and management capabilities
  • Adequate knowledge of the construction industry, current trends and best practices
  • Experience in managing project operational activities
  • Significant problem solving and analytical abilities.
  • Strong communication and delegation skills.
  • Strong understanding and interpretation of technical drawings.
  • Continuous development in current trends and best practices in the construction & fabrication industry.
  • Possess a relevant degree in Engineering/Accounting/Economics/Business Administration
  • MBA and other additional qualifications would be an added advantage
  • A minimum of 5 – 10 years experience in a similar role in a construction and fabrication industry

Job Title: Driver (Cars & Lorry)
Location: 
Lagos

Qualification

  • Completion of High School or OND or Trade Test I, II, III is preferred.

Job Title: Fitter-Welder
Location: 
Lagos

Job Description

  • To interpret drawings and cover wide scope of projects
  • To implement codes and procedures to the later
  • To plan the daily work and report daily progress in writing to fit into the requirements of the job as it relate to pressure and schedule.
  • Should understand & strive for Integrity, Safety, Quality, Cost, Schedules & Reputation.

Required Skills and Qualifications

  • Minimum of National Diploma (ND) in Construction Engineering with at least 2years cogent years of experience in pressure vessel/piping works
  • To persuade the workforce to work safely, qualitatively, realize targets, care for tools, care for environment and discipline workforce accordingly.

Job Title: Procurement Officer
Location: 
Lagos
Duration: 3 Month contract

Job Description

  • Research potential vendors/suppliers, review and analyze all supply and price options.
  • Compare and evaluate offers from different suppliers.
  • Negotiate contract terms of agreement and pricing.
  • Track orders and ensure timely delivery.
  • Ensure that supplies comply with company’s standards

Required Skills and Qualifications

  • BA/B.Sc/HND in Business Administration, Economics with at least 2 years experience in procurement management in the construction/manufacturing industry.
  • Method of Application;

Job Title: Contract Factory Worker
Location: 
Lagos
Slot: 45 Openings

Details

  • We are in need of Contract Factory Workers with welding, fabrication, painting and bending experience.

Required Skills & Qualifications

  • 3 – 7 years experience as Fitters, Crane and Forklift operator.
  • Completion of High School or OND or Trade Test I, II, III is preferred
  • Must be forklift Certified.

Job Title: Project Engineer
Location: 
Lagos

Job Description

  • Reviews project plans and proposals, works with management to develop project objectives.
  • Identifies project responsibilities by determining the phases and elements of the project. Calculates time frames and sequences the stages of the project.
  • Prepares and distributes a description and timeline of the project.
  • Studies project design, customer requirements performance standards, determines project specifications.
  • Presents cost estimates and performance standards. Conducts tests assuring safe and satisfactory project performance.
  • Reviews contractor bids; interviews and assigns personnel to specific phases and elements of the project.
  • Through project coordination meetings and other forms of communication, oversees and coordinates the technical aspects of the project.
  • Prepares status reports and regularly monitors budgets, contractors and schedules.
  • Allocates project resources appropriately; approves expenditures; employee contractor contracts.
  • Keeps an accurate record and electronic data base of all elements of the projects.
  • Presents procedures, rules and regulations to those involved in the project; maintains a safe, clean and productive work environment through enforcing procedures.
  • Maintains project integrity and reputation through compliance with state and federal regulations.

Required Skills & Qualifications

  • Working knowledge of Computer Aided Design and Drafting Soft-ware/AUTOCAD.
  • Good knowledge of Engineering and construction drawings and codes, Practice and Regulations.
  • Strong drive and Initiatives to project management strategy.
  • Minimum of a good first degree BSc/HND in mechanical and civil engineering
  • Professional qualification registered with COREN for Project Engineer & NIA for Architects.
  • Minimum of eight (8) years cognate experience from a reputable Oil & Gas, Fabrication or Construction engineering industry.

Job Title: QA/QC Officer
Location: 
Lagos

Job Description

  • Approve incoming materials by confirming specifications, conducting a visual and measurement test, and rejecting and returning unacceptable materials
  • Work with the Factory manager to identify approaches and methods to improve overall quality. Educate workers on the require standards.
  • Note and report on work that does not meet requirements. Interpret and review shop drawings.
  • Inspect completed work and/or work in progress to determine whether the work meets specifications and plan requirements.
  • Monitor overall construction performance with regard to technical quality and compliance with design and specification requirements.
  • Approve in-process construction/fabrication by confirming required specifications.
  • Approve all finished products by confirming specifications and conducting required tests
  • Return products for re-work if needed and complete documentation to confirm re-work
  • Document and update inspection results by completing reports and logs
  • Maintain safe work environment by following standards and procedures and complying with legal regulations
  • Coach and mentor junior employees; seek opportunities to grow leadership in others.
  • Study the codes and required projects specifications.
  • Preparation of testing, qualification and certification processes for welding as per project specifications.
  • Monitors and ensures that welding is carried out in the right condition.
  • Provision of accurate data of the welding inspection parameters.
  • Preparation of relevant reports on welding activities.
  • Provision of professional supervision to the welding team.

Required Skills & Qualifications

  • Experience in developing and reviewing project quality plans, contract documents and project specifications
  • Coordinate Test Pack preparation and Final Handover documentation activities to ensure smooth handover.
  • Conduct and organize QMS Internal/External audit and ensure close out of all Inspection and Audit Non conformities
  • Degree in Mechanical Engineering
  • At least 5 – 10 years of experience in managing large value EPC Projects (Onshore Projects), construction/ fabrication and in Oil & Gas industry

Job Title: Technical Manager
Location:
 Lagos

Job Description

  • Direct and oversee construction projects from conception to completion while monitoring compliance with safety and construction regulations.
  • Coordinate subcontractors and the construction team to meet contractual conditions of performance.
  • Prepare external and internal reports relating to job status, daily progress, estimates, and deliverables.
  • Negotiate agreement terms, manage construction contract drafts, bid on projects, and obtain permits to analyze and mitigate risks.
  • Communicate with the responsible parties to ensure quality construction exceeds company standards and proper industry techniques and processes are utilized, while ensuring the client’s needs and wants are efficiently met.
  • Review projects on a daily basis to ensure quality construction standards exist and estimates remain within budget.
  • Supervise construction projects to ensure they are completed on time and exceed the customer’s requirements.
  • Work under deadlines in a fast-paced environment to plan and coordinate all aspects of the project process from hiring contractors to working with engineers, architects, and vendors.
  • Coordination of the technical department staff activities in relation to generating project drawings, B.O.Q., tender submission and material take offs (MTO).
  • Coordination of company projects from inception to completion at site
  • Participate in the company drive in the implementation of the ISO 9001 and Quality Management System (QMS).
  • Preparation of workshop drawings for various projects.
  • Checks and approve construction workshop drawings of all projects for compliance with client’s specifications and standards.

Required Skills and Qualifications

  • Leadership, project, and time management skills
  • Strong communication, planning and organisation skills
  • Team player and ability to problem solving
  • Time management.
  • Excellent resource, planning, and time management skills
  • Superior management and delegation capabilities
  • High level of financial responsibilities preferred
  • Sound technical knowledge of project drawings and interpretations
  • Bachelor’s Degree in Mechanical and Civil Engineering.
  • Professional qualification will be added advantage.
  • 5 – 10 years experience in fabrication and construction industry

Job Title: Maintenance Technician
Location: Lagos


Job Description

  • Conducts inspections to determine the need for repair and to estimate repair costs. Schedules preventive maintenance for all safety equipment and systems. Maintains logs of pending and completed maintenance activities. Prepares progress, status, and other reports.
  • Performs limited administrative functions such as evaluating subordinate personnel work performances and reports.
  • Controlling the production plan, and comparing the performance against the plan.
  • Collecting maintenance data of all kind of equipment in the plant.
  • Provide training, development and leadership to local mechanical maintenance personnel
  • Enforce the safety policies, rules, regulations and Standard work Instruction of the Company.
  • Preparing maintenance plan for all kind of equipment in the plant such as; Machines (according to the manuals).Cranes, Forklift, Generators, Welding machines and other Plant Equipments.
  • Make the maintenance routine (daily, weekly & monthly) to all kinds of equipment in the plant.
  • Lead the Mechanical maintenance team – train the employees, guide them and prepare them a daily work plan.
  • Updating and adjusting the Mechanical maintenance plan according to changes that occurs from time to time and new equipment we purchase.
  • Logs, monitors, and controls the dispensing of all tools used in maintenance activities. Must be able to quickly determine whether any tools are missing. Responsible for the safe transportation of tools within the facility.
  • Assigns and inspects work of maintenance personnel. Coordinates the preparation of repair orders, equipment records, requisitions, etc.

Required Skills and Qualifications

  • 5 years experience in construction/fabrication industry as Mechanical Maintenance Supervisor
  • Additional technical trade courses desirable.
  • Excellent Job task planning and organizing
  • HND / B.Sc in Mechanical Engineering

How to Apply
Interested and qualified candidates should send their CV to sevan@sevan-nigeria.com or info@sevan-nigeria.com

Application Deadline 11th February 2019.

Leave a Comment

Your email address will not be published. Required fields are marked *